Overview
Wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 500 VAC/VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.
How They Work
- The sensor measures DC or AC voltage at the connected terminals at configurable intervals.
- Readings are transmitted wirelessly to the UpKeep Edge gateway via the 900 MHz protocol.
- UpKeep Edge processes the data and triggers alerts when voltage levels exceed or drop below thresholds.
- Historical data is stored for equipment health monitoring, battery tracking, and power analysis.
Applications
- measuring battery voltage at specified intervals where
- sensor data will be wirelessly sent to i
- the online
- sensor monitoring system
- Car battery monitoring
- Boat and marine battery monitoring
- RV battery monitoring
- ATV/motorcycle battery monitoring
Specifications
| SKU | MNS2-9-IN-VM-500 |
|---|---|
| Category | Power & Electrical |
| Sensor type | Voltage Detection Sensors |
| Dimensions | 3.7 × 2.9 × 1.4 in |
| Weight | 5.2 oz |
| Resolution | 0.01 VDC |
| Operating Temperature | range (board circuitry and coin cell) -7°C to +60°C (20°F to +140°F) ** |
| Wireless Range | of 1,200+ feet through 12+ walls * |
| Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. |
| Battery Life | Up to 10+ years (usage-dependent) |
| Encryption | Encrypt-RF (256-bit AES) |
Questions about this sensor
- What does the Industrial - Voltage Meter, 500 VAC measure?
- Wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 500 VAC/VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.
- Where is the Industrial - Voltage Meter, 500 VAC typically installed?
- Common placements include measuring battery voltage at specified intervals where, sensor data will be wirelessly sent to i, the online. It uses a NEMA-rated industrial enclosure, so it holds up to wash-down, outdoor, and high-vibration locations.
- What does it need to work?
- An UpKeep Edge gateway within about 1,200 ft. One gateway supports 50 or more sensors, and readings reach UpKeep over the gateway's cellular, Ethernet, or Modbus connection.
- What happens when a reading is out of range?
- UpKeep opens a work order against the asset and notifies the assigned technician. You set the thresholds for each voltage detection sensor individually.
