Overview
Industrial wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.
How They Work
- The sensor measures DC or AC voltage at the connected terminals at configurable intervals.
- Readings are transmitted wirelessly to the UpKeep Edge gateway via the 900 MHz protocol.
- UpKeep Edge processes the data and triggers alerts when voltage levels exceed or drop below thresholds.
- Historical data is stored for equipment health monitoring, battery tracking, and power analysis.
Applications
- measuring battery voltage at specified intervals where
- sensor data will be wirelessly sent to i
- the online
- sensor monitoring system
- Car battery monitoring
- Boat and marine battery monitoring
- RV battery monitoring
- ATV/motorcycle battery monitoring
Specifications
| SKU | MNS2-9-IN-VD-200 |
|---|---|
| Category | Power & Electrical |
| Sensor type | Voltage Detection Sensors |
| Dimensions | 3.7 × 2.9 × 1.4 in |
| Weight | 5.2 oz |
| Resolution | 0.01 VDC |
| Operating Temperature | range (board circuitry and coin cell) -7°C to +60°C (20°F to +140°F) ** |
| Wireless Range | of 1,200+ feet through 12+ walls * |
| Certifications | 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. |
| Battery Life | Up to 10+ years (usage-dependent) |
| Encryption | Encrypt-RF (256-bit AES) |
Questions about this sensor
- What does the Industrial - Voltage Detection, 200 VDC measure?
- Industrial wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor. This sensor is capable of measuring voltage up to 200 VDC by connecting the leads on the sensor to the positive and ground terminals of the device being measured.
- Where is the Industrial - Voltage Detection, 200 VDC typically installed?
- Common placements include measuring battery voltage at specified intervals where, sensor data will be wirelessly sent to i, the online. It uses a NEMA-rated industrial enclosure, so it holds up to wash-down, outdoor, and high-vibration locations.
- What does it need to work?
- An UpKeep Edge gateway within about 1,200 ft. One gateway supports 50 or more sensors, and readings reach UpKeep over the gateway's cellular, Ethernet, or Modbus connection.
- What happens when a reading is out of range?
- UpKeep opens a work order against the asset and notifies the assigned technician. You set the thresholds for each voltage detection sensor individually.
